Legendary Masonry Spokane designs and builds brick fireplaces in Spokane, WA, including indoor surrounds, hearths, and outdoor fireplace features. Whether you want a rustic wood burning design or a clean modern gas fireplace, we create brickwork that becomes the focal point of your living space.
Legendary Masonry Spokane provides professional brick fireplace throughout Spokane, WA, Washington and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call 509-250-8836 or request your free quote.
Custom Brick Fireplaces Built for Spokane Homes
A brick fireplace should fit your home in Spokane as well as your front door does. At Legendary Masonry Spokane, we design and build brick fireplaces that match the architecture of your house, the way you actually use your living room, and the realities of our local climate.
Whether you want a classic wood-burning masonry fireplace, a gas-insert-ready brick surround, or a full-height brick accent wall with a firebox, we treat it as a permanent part of your home, not a quick cosmetic project. We look at how your home is framed, how the existing chimney or venting is built, and how brick weight will transfer down to the foundation. That structural thinking is what separates a fireplace that looks good for a few years from one that still draws cleanly and stays crack-free decades from now.
For many Spokane homeowners, a new brick fireplace is part of a living room or basement renovation. We coordinate with your general contractor or interior designer when needed, so the fireplace layout, mantle height, TV placement, wiring, and built-ins are all planned together. That avoids awkward clearances and gives you a realistic plan for furniture placement and traffic flow around the hearth.
Our Brick Fireplace Design & Planning Process
Every project with Legendary Masonry Spokane starts with an on-site visit. We measure the room, inspect any existing fireplace or chimney, and talk through how you want to use the space. For example, if you routinely burn wood in winter, we size the firebox for efficient heat and easy log loading. If you primarily want a clean, low-maintenance focal point, we design the brickwork around a gas insert or electric unit.
During planning we address:
• Code and safety: Spokane and Washington State building codes govern clearances to combustibles, hearth and mantle dimensions, flue size, and seismic considerations. We calculate the correct firebox and flue proportions so your fireplace drafts properly in cold, still winter air.
• Structural support: Brick is heavy. If we are building a full masonry fireplace rather than a thin brick veneer, we determine whether your slab or foundation can handle the added load or if we need a thickened slab, pad footing, or steel support.
• Heat performance: Open wood fireplaces are beautiful but not the most efficient heaters. Many Spokane homeowners choose a hybrid approach, such as a traditional brick surround with a high-efficiency insert. We help you weigh ambiance, fuel costs, and performance before you commit.
You will see a clear layout drawing, elevation of the fireplace face, mantle height options, and sample brick patterns before we order materials. That planning prevents surprises once we start laying brick.
Brick Choices, Patterns, and Layout Options
The exact brick you choose has a bigger impact than most people expect. Legendary Masonry Spokane keeps samples of clay, concrete, and reclaimed-style brick that perform well in our freeze-thaw cycles and still look sharp next to common Spokane siding and interior finishes.
Common choices include:
• Full brick vs thin brick: Full brick is optimal for new masonry fireplaces and offers classic depth at the firebox opening. Thin brick veneer is ideal when we are building a surround over framed walls or converting an outdated tile or stone face without overloading the floor.
• Color and finish: In Spokane we see a lot of warm reds, earth tones, and muted grays that pair well with Northwest wood trim and LVP flooring. You can choose wire-cut brick for a crisp, uniform look, tumbled brick for a softer, rustic feel, or a smooth face brick for a more contemporary fireplace.
• Bond and detailing: Running bond, stacked bond, herringbone in the firebox back wall, soldier courses at the opening, and basket weave at the hearth are all options. We often recommend a contrasting pattern inside the firebox to draw the eye and a more subtle, horizontal pattern across the face for balance.
Mortar joints are another design tool. Tight, flush joints produce a more modern look, while slightly raked or struck joints emphasize shadows and texture. We can color the mortar to blend with the brick or contrast it to make the pattern stand out.
How We Build a Durable Brick Fireplace in Spokane
A brick fireplace is more than stacking block and spreading mortar. Our crews at Legendary Masonry Spokane follow a step-by-step process that respects both craftsmanship and local conditions.
1. Demolition and prep: For remodels, we carefully remove existing surrounds, tile, or stone while protecting floors and nearby finishes. We cap off old gas lines if needed and check for hidden framing that may be too close to heat.
2. Structure and firebox: For full masonry units, we build or repair the firebox and throat with firebrick and high-temperature refractory mortar. These materials withstand direct flame and thermal cycling better than regular brick and mortar. We shape the smoke chamber and throat to improve draft, which matters in colder Spokane winters when air is dense.
3. Chimney and flue connection: If you are keeping or modifying an existing chimney, we inspect for cracks, deterioration, and proper liner sizing. When we connect a new firebox to an old chimney, we transition carefully so smoke and gases move smoothly without turbulence or backdraft.
4. Surround and face brick: We lay brick in the pattern you approved, checking each course for plumb and level. Corners are tied and interlocked to avoid future separation. We keep consistent joint spacing and strike joints once the mortar takes an initial set, which improves weather resistance and appearance.
5. Hearth and mantle: We build a hearth that meets local code for projection and thickness and that is sized realistically for how you load wood or access your gas insert. Mantles and shelves are installed with non-combustible supports and proper clearances from the firebox opening.
6. Curing and cleanup: Mortar needs a controlled curing period. We advise you on when it is safe to have your first fire and how to start with small, cooler burns to gently drive out moisture from the new masonry.
Cost Factors for a Brick Fireplace in Spokane
Brick fireplace pricing varies widely, and we explain the numbers openly so you know what you are paying for. When Legendary Masonry Spokane prepares a quote, we break your cost into predictable parts.
Key drivers of cost include:
• Type of construction: A full masonry fireplace with a new chimney is the most involved and expensive option. A thin brick veneer surround over an existing framed wall, or refacing around an existing gas insert, is significantly less.
• Structural work: If we need to add a new footing or reinforce your floor to support the fireplace, you will see that as a separate line item. Split-level homes and older basements in Spokane sometimes require this extra work.
• Brick and detail level: Standard, locally stocked brick and simple running bond patterns cost less than imported or custom-colored brick and multiple decorative bands or inlays. Intricate patterns, arches, or integrated niches require more time and skilled labor.
• Integrations: Routing wiring for TVs, sconces, or sound systems across the fireplace face, or coordinating with HVAC and gas contractors, adds complexity. It is more cost effective to plan those details with us before we start masonry instead of trying to cut in later.
We provide written estimates that spell out materials, labor, and any allowances. If you are comparing quotes in Spokane, make sure you are looking at similar scopes, especially around structural work and chimney upgrades, not just the face brick price.
Local Considerations: Spokane Climate, Codes, and Timing
Spokane’s winters are cold and can be long, which directly affects how a brick fireplace should be designed and how we schedule the work.
Draft and smoke: When outside air is cold and dense, fireplaces can be harder to start without smoke spillage. We size flues correctly for your firebox opening and may recommend outside air kits, tight-fitting dampers, or glass doors so you are not pulling too much warm air from your living space.
Freeze-thaw durability: Exterior portions of chimneys and any brick that sees outdoor moisture must be carefully detailed. We use masonry units and mortar that are rated for freeze-thaw conditions seen in Eastern Washington, manage flashing properly where the chimney passes the roof, and recommend appropriate caps or crowns to shed water.
Scheduling: Brick fireplace projects that involve exterior chimney work or new foundations are best started between late spring and early fall when temperatures allow consistent curing. Indoor-only veneer and refacing projects can usually be performed year-round, though we still manage ventilation when cutting or grinding indoors.
Permits and inspections: Within Spokane and surrounding jurisdictions, new or significantly altered fireplaces often require permits and inspections. Legendary Masonry Spokane can assist with the permit process and coordinate inspections so your project passes on the first try and your insurance company has proper documentation.
What to Expect When You Hire Legendary Masonry Spokane
From first call to the first fire, our goal is a smooth, predictable process for your brick fireplace project.
Initial consultation: We discuss your ideas, rough budget, and timeline. If it seems like a good fit, we schedule a site visit where we take measurements, check access, and evaluate any existing fireplace and chimney components.
Design and proposal: You will receive a clear proposal with drawings, brick and mortar selections, and a schedule outline. If you want to see specific brick options in person, we help you review samples in natural light in your own home.
During construction: Our crew protects floors and adjacent finishes, manages dust as much as the conditions allow, and communicates about milestones like inspection dates and when heat or power may be temporarily affected. For occupied homes, we often stage work to keep your living areas usable as much as possible.
Final walkthrough and education: Once the brickwork is complete, we review the fireplace with you, point out all the details, and explain operation and care. You will know how to break in a new masonry fireplace, what cleaning products to avoid on brick and mortar, and what signs of wear to watch for as the seasons change.
Legendary Masonry Spokane stands behind our brick fireplace work with workmanship warranties that reflect the type of project we completed for you. If you have questions months or years later, we are still here in Spokane to answer them and service what we built.
